# Trading chart

Source: https://docs.settlemint.com/docs/console/my-assets/trading-chart
The Console trading desk price chart: ranges, candle intervals, axes, volume, indicators, your fill marks, and a limit order started from a chart price.

The price chart sits at the top of an instrument's trading desk in the Console, above the order tables. It draws the instrument's trades as candles, bars or a line. This page describes what it shows and how to start an order from it. [Trading](https://docs.settlemint.com/docs/console/my-assets/trading) covers placing the order, the order book and the order tables.

## The price chart [#the-price-chart]

Pick a range under the chart, or from the range menu in the chart toolbar on a narrow chart: **1D**, "5D", "1M", "3M", "6M", or "All". The workspace opens on "1D". The "Candle interval" control reads "Auto" with the interval it chose, for example "Auto · 15m": it takes the finest interval that shows the whole range on the chart, every candle drawn with a gap beside the next, in at most 500 candles, or 190 for 1-day candles, and otherwise 1-week candles. The choice follows the chart's width. On a laptop-sized workspace "1D" shows 15-minute or 1-hour candles, and 5-minute candles need a chart wide enough for the whole day of them. "All" shows 1-week candles once the history is longer than about six months. A market with less history than the range starts at its first candle, so a market ten days old shows its whole history on "6M", in 4-hour candles on a laptop-sized workspace. Pick an interval yourself and it stays across ranges until you pick "Auto" again. Each pick of a range or an interval fits the time axis to the candles it shows, also when the interval stays the same, so 1D on 1-hour candles shows the day's hours across the whole chart. A range with only a few candles draws them at a normal candle width against the right of the chart, not stretched across it. A range shows at most 500 candles, so a fine interval you picked shows only the newest part of a long range. When a picked interval gives a range more candles than the chart can draw with a gap between every two, the chart opens on the newest of them. Drag the time axis or zoom out to reach the older ones. The price axis fits the candles of the range, so older prices outside it do not flatten the chart. With the orders overlay on, the axis also stretches to reach an open order priced just beyond the candles, so the order keeps its line on the chart. An order far outside the candles' range is not drawn, and the chart counts it above or below the range instead. Drag the price axis to zoom the prices, and double-click the axis to fit it again. While a zoom or pan leaves an open order off the chart, the chart counts that order above or below the range too. The count sits at the top of the plot, left of the price axis. Pan and zoom follow a left-button drag only: a right-click leaves the chart as it is, and with a drawing tool selected it places no point. Every price-axis label carries the instrument's price step, in figures of equal width, so a price below 4 reads 3.9990 and its separator sits in the same column as every other label's. The time axis shows clock times, and a tick that falls on midnight shows its date, so a range of several days reads by day. 1-day and 1-week candles show dates only.

The chart is drawn with TradingView Lightweight Charts, and the "Charts by TradingView" link at the end of the line under the chart opens TradingView's site in a new tab. The chart draws a candle, bar or line point only for an interval that holds a trade, so every candle stands for trades you can find in **Recent trades**. An interval without a trade, including the hours the instrument's session is closed, is left out, so the time axis steps from one traded interval to the next. The same range and interval show the same trade history in every language, whether the orders panel is open or hidden. A range with only one interval that traded shows one candle. The indicators skip intervals without trades too. An indicator without enough candles shows how many it needs in the legend, for example "Needs 21 candles", or "Needs 21 candles with trades" when the range has enough candles but too few of them traded. Volume bars run along the bottom of the price chart, one under each candle, in the candle's up or down colour and drawn see-through so the candles stay readable. The candles keep clear of them, and an interval without a trade has no bar. The Open, High, Low and Close summary adds "Volume" with the pointed candle's traded amount in the base symbol, for example "1,250 RHE30". Volume is on when you first open a workspace, in the Console and in the Investor portal. Turn it off or on again under "Indicators". The workspace remembers the choice. A workspace whose indicators were saved before volume was on by default shows volume once. If you turn it off after that, it stays off.

The Open, High, Low and Close summary keeps each label whole and wraps onto more lines when the chart is narrow. Each order line has a label with its side and quantity beside the price axis, right of the newest candle, so it never covers a candle. Hold the pointer on it to read the whole order. When working orders sit above or below the prices the chart shows, a line along the top edge of the chart counts them. The chart keeps room above its candles for that line, so the count covers no candle unless you zoom the price axis by hand, and the chart keeps its full height. A range with only a few candles still labels its time axis: the empty part of the chart before the first candle carries the axis times, and a range whose candles all fall between the axis steps labels its first and last candle. The first candle of a new day carries the date, also after a night without trades, and nothing is labelled past the newest candle. The Investor portal chart follows the same layout.

The chart marks your own fills, but only your newest 200 fills in the instrument, so an older fill on a long range has no mark. "Your trades" lists every fill. The Investor portal chart marks your newest 200 fills from the day before the range's first candle onwards, so on a long range with more fills than that, the oldest fills have no mark there either.

## Start an order from the chart [#start-an-order-from-the-chart]

Point at the candles or the price axis and a "+" button appears against the plot edge of the axis, at the crosshair price. On the row of an order line's label, the "+" sits just left of the label, so the label and its **x** stay in reach. Over the candles the crosshair snaps to the nearest price drawn under your pointer, such as a candle's high or close. On the price axis it follows your pointer's height, so you can pick any price. An indicator pane below the candles has no "+".

Select "+" and the order ticket switches to a limit order at that price, rounded to the instrument's price step, with the focus on **Quantity**. If you hid the order ticket with its button in the panel bar, the pick opens it again. A price at or below the last price makes it a buy limit order, and a price above it a sell limit order. Enter the quantity and place the order. The ticket checks it like any other order, as [Enter the order](https://docs.settlemint.com/docs/console/my-assets/trading#enter-the-order) describes.

To pick the other side, right-click the "+", or press the context-menu key or Shift+F10 while it has focus. The menu offers a buy limit order and a sell limit order at the same price. The ticket keeps its earlier price until you choose one. While the menu is open, the crosshair and the Open, High, Low and Close summary stay on the price and candle you picked. If a new trade moves that price off the chart, the menu closes and the focus moves to the chart. A right-click anywhere else leaves the chart as it is.

With the keyboard, press Tab to reach the "+" on the chart. It shows at the last price, the Up and Down arrows move it one price step, and Enter fills the ticket. If a new trade rescales the chart and moves your price off it, the "+" hides and the focus moves to the chart, so the next Tab starts from there. The "+" shows wherever the desk shows the order ticket, so the instrument page has none. It also stays hidden while the ticket can't take a limit order at a price you pick: on an instrument without limit orders, and while the session trades at the last price. If it hides that way while it has the focus, the focus moves to the chart. The Investor portal desk works the same way.